Subaru Legacy

since 1990-1998 release

Repair and operation of the car



Subaru Legacy
+ 1.1. Identification numbers
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Systems of start, ignition
+ 8. Transmissions
+ 9. Coupling, shaft
+ 10. Brake system
+ 11. Suspension bracket
- 12. Steering
   12.1. Introduction
   12.2. Technical characteristics
   12.3. Steering wheel
   12.4. Tips of steering draft
   12.5. Replacement of protective covers of steering transfer
   12.6. Steering transfer
   12.7. Pump of the amplifier of steering
   12.8. Removal of air from system of steering with the amplifier
+ 13. Body
+ 14. Electric equipment


2d841be8


12.5. Replacement of protective covers of steering transfer

PERFORMANCE ORDER
1. Lift a forward part of the car and record on supports. Remove a wheel.
2. Remove the corresponding tip of steering draft.
3. Weaken an external collar of fastening of a protective cover of steering transfer.
4. Weaken an internal collar of fastening of a protective cover of steering transfer.
5. Shift a protective cover on steering draft.
6. Clear steering draft and establish on it a new protective cover. Fix a cover by new collars.
7. Establish a tip of steering draft.
8. Establish a wheel and lower the car.
9. Check and, if necessary, adjust the angles of installation of forward wheels.